噴砂（丸）房系統企業產品

飛機數段噴漆工藝房-港口碼頭特涂設施

Ship section coating room-special ship coating equipment

1、兩套硬性性涂料建設制約；最終目的是保護海洋資源環保；以此、再次補救Sa2.5級；本身提高鍍層受眾采用使用期限15年裝修施工組織設計應用。

2、（邊側園角）2mm；耐磨涂層危害少于2%或25m2,噴砂工作Sa2.5級。

3、（不光滑度）30-75um；表層溫差比露點高3℃；干膜層厚320um。

4、（顆粒物尺寸大小）3、4、5臟污分布區1級；光學顯微鏡由此可見更小浮灰徹底清除。

5、（氯化鈉）50mg/m2；500總噸船用這里的海水艙；150m長散貨船雙舷側。

6、表面處理技術應用規格尺寸書6元素：類產明稱稱、納米涂層資料、土建工程做法、膜厚范疇、前治療、壞境。

7、70%Sa2級（測試不符合理底漆）；合理底漆掃砂或壓力水沖洗。

8、（相干濕度）不低于85%。

9、90/10標準：90%符合標準單位值，10%滿足要求值的90%。

1.A mandatory coating construction standard; Purpose is to protect the Marine environment; Once, twice Sa2.5 processing level; A kind of guarantee coating goal service life 15 years construction technology.

2.(the edge horn) 2 mm; Coating damage is more than 2% or 25 m2, sandblasting processing Sa2.5 level.

3.(roughness) 30 75 um; The surface temperature than dew point 3 ℃ high; Dry film thickness 320 um.

4.(particle size) 3, 4, and 5 dust distribution grade 1; Visible to the naked eye more little dust removal.

5.(sodium chloride) 50 mg/m2; 500 gross tons special water tank ship; 150 m long bulk carrier double side to side.

6.coating technology specification 6 elements: product name, coating materials, construction method, film thickness range, pretreatment, the environment.

7.70% Sa2 level (experiment unqualified primer); Qualified primer and sand or high pressure water cleaning.

8.(relative humidity) less than 85%.

9.90/10 rule: 90% to 10% of the value standard of 90%.

要根據實驗室管理標準想要，我們大家的的服務機遇有這樣的：

1、我們都是可以我認為僅有涂漆房不一段能具備PSPC標準化，不噴涂房更不會實現標準化；往往不噴涂房的各位大家可能幫搭建，有噴涂房的各位大家可能幫完美。

2、15年利用使用時間的國家標準，應該對各種服務行業有運用角色。

3、大環境小編能夠完成無嚴重污染。

4、Sa2.5級寓意著高效能噴砂和回收利用程序的食用和緩解。

5、粗糟度管理代表著著爐料分割平衡裝置的標準增長了（留存細小粒，避開煤塵）。

6、溫、溫度濕度、料厚測試實驗室設備用率能大大提升 。

7、含鹽量、清潔衛生度、積塵探測許多采購合同。

8、面除塵生產設備（電動三輪、氣動系統、防火）很大的使用。

9、表面處理房照明電器的設施也許需求改善效果，選定產品、來設計布設、裝置安全施工。

10、為確保情況被限狀況：合情合理的清灰設計、低能耗的加溫設計、不靠譜的抽濕設計為涂裝主設備施工作業就必須主設備。

According to the standard requirement, our service opportunities have these:

1.We can think only painting room can not meet the PSPC standard, no more can't satisfy the standard coating room; So there is no painting room we can help construction, painting the room we can help improve.

2.15 years of service life standard for other industries, may be a reference for.

3. we can do no pollution environment.

4.Sa2.5 level means efficient sandblasting and recovery system and improve the use of.

5.Roughness control means abrasive separation device demand rose (save fine particles, remove dust).

6.Temperature, humidity, thickness testing instrument utilization rate is greatly increased.

7.And salinity, cleanness and dust detection in large quantities.

8.surface aspiration equipment (electrical, pneumatic, explosion-proof) used in large amounts.

9.Painting room lighting facilities may need to improve, choose lamps and lanterns, design installation, construction.

10.To ensure the environmental restrictions conditions: reasonable dust removal system, the energy saving of the heating system, reliable dehumidification system construction must be coating equipment.

對戰飛機修造服務業IMO涂覆性的標準(PSPC)的實施，斯特爾機械提供船舶噴砂涂裝設備系統整體解決方案及技術支持，為船舶修造行業設計制造完善的船舶分段噴砂房噴漆房，鋼板拋丸預處理線，舾裝件、艙口蓋等船體部件二次分段涂裝房，壓載艙特涂設備，連續高效噴砂設備及回砂系統設備，精準的砂塵分離裝置，環保節能型除塵設備，大中型真空吸砂設備，組合式除濕機，高效暖風機，移動防爆風機，電動/氣動彈簧/防燃型吸塵器設施，高電壓水除垢設施，平均溫度、對環境濕度的、厚薄檢查器材，含鹽量、洗滌度、灰層用檢查設施。

Facing the ship building and industry IMO coating properties standard (PSPC), the implementation of the frost's mechanical professional ships provide gush arenaceous coating equipment system overall solutions and technical support, for ship building industry professional design manufacturing perfect ship segmentation gush arenaceous room spray-paint room, steel plate is shot pretreatment line, outfitting a, hatch cover parts such as secondary section hull coating room, water ballast tank with equipment, high efficiency, continuous sand blasting equipment and back, the fine sand system equipment sand dust separation device, environmental protection energy-saving dust removal equipment, large and medium-sized vacuum sand blasting equipment, assembled dehumidified machines, efficient warm air blower, mobile explosion-proof electric fan, / pneumatic/explosion-proof type aspiration equipment, high pressure water cleaning equipment, temperature, humidity, thickness testing instrument, salinity, cleanliness, dust special test equipment.